Thursday, January 21, 2010

Who Knows what these are?

What they are for and where they came from!

and yes, the person who gets it right wins something, not sure what yet...
Posted by at
Labels: ,

22 comments:

  1. MontyJanuary 22, 2010 at 12:14 AM

    It's the anchor for the banjo fitting when you're using a block to split a brake line... Like when you wanna run dual fronts...

    ReplyDelete
  2. MikeJanuary 22, 2010 at 12:27 AM

    titanium banjo bolts...brembo?

    ReplyDelete
  3. PerkunasJanuary 22, 2010 at 12:29 AM

    For some use with split valve covers?

    ReplyDelete
  4. B.B.Inc.January 22, 2010 at 12:52 AM

    Seat:1 7/8"E and 2 1/16"G 360"inlet (obsolete part) Use part 11-2465. Racing only use part 11-2466 S and S Carbs.

    ReplyDelete
  5. kevinhogJanuary 22, 2010 at 1:51 AM

    Compression releases???

    ReplyDelete
  6. kevinhogJanuary 22, 2010 at 1:53 AM

    Needle seats for banjo fittings???

    ReplyDelete
  7. kevinhogJanuary 22, 2010 at 1:55 AM

    Main jet holders???

    ReplyDelete
  8. jbfrmcaJanuary 22, 2010 at 7:43 AM

    cross over fittings for fatbobs from mr parti?

    ReplyDelete
  9. Heroin- respectthepanda.comJanuary 22, 2010 at 8:11 AM

    They look alot like the bowl drains off my dual Solex setup.

    ReplyDelete
  10. nikkodoJanuary 22, 2010 at 8:19 AM

    they appear to be some really big jets. Due to your infatuation with airplanes maybe they're aeronautical?

    Just a guess

    ReplyDelete
  11. grantJanuary 22, 2010 at 8:55 AM

    i know what they are!

    ReplyDelete
  12. gaycoJanuary 22, 2010 at 9:15 AM

    they belong on top of the frontsuspension-legs? on top of the fork ? greets from holland,gayco gayco6@hotmail.com

    ReplyDelete
  13. justin mitchellJanuary 22, 2010 at 10:03 AM

    Looks like a banjo bolt needle seat

    ReplyDelete
  14. RivetJanuary 22, 2010 at 10:12 AM

    Banjo fuel fitting/needle seat for an S&S carb.

    ReplyDelete
  15. JacobJanuary 22, 2010 at 10:27 AM

    maybe it is the inside of a faucet

    ReplyDelete
  16. PearsonJanuary 22, 2010 at 11:51 AM

    some sort of main jet?

    ReplyDelete
  17. "LOUIE"January 22, 2010 at 7:17 PM

    A kanooter valve for the primmary gauge converter.

    ReplyDelete
  18. MWeishaarJanuary 23, 2010 at 7:30 AM

    bench vise warts

    ReplyDelete
  19. Dan CollinsJanuary 23, 2010 at 11:52 AM

    come on guys, everyone knows those are C3PO's buttplugs, he has two of em....so I've heard....

    ReplyDelete
  20. andyJanuary 26, 2010 at 9:37 AM

    ppi rotary derter valve.

    ReplyDelete
  21. spigJanuary 31, 2010 at 10:08 AM

    float needle seat and plug for float bowl

    ReplyDelete
  22. PasiFebruary 1, 2010 at 2:05 PM

    Linkert needle seats.

    ReplyDelete

Subscribe to: Post Comments (Atom)